Lebitso la Sehlahiswa le Mofuta:Filimi ea motheobakeng sa Letoto la OCA Releas Film GM60
Lintlha tsa Sehlahisoa sa Bohlokoa
bohloeki bo phahameng, bohloeki bo tlase, botala bo babatsehang, botsitso ba mocheso oa mahlakoreng, ponahalo e kholo.
Kopo e ka Sehloohong
E sebelisoa bakeng sa filimi ea OCA.
Sebopeho
Filimi ea motheobakeng sa Setšoantšo sa Sebopeho sa Filimi sa OCA Releas
Leqephe la lintlha
Botenya baGM60e kenyelletsa: 38μm, 50μm, 75μm, 100μm le 125μm joalo-joalo.
| LETLOTLO | THUTO | BOHLOKOA BA TLOAELE | TEKO MOKHOA | ||||
| TS'OANE | µm | 38 | 50 | 75 | 100 | ASTM D374 | |
| MATLA A TŠEPE | MD | MPa | 210 | 203 | 214 | 180 | ASTM D882 |
| TD | MPa | 255 | 239 | 240 | 247 | ||
| TS'ELISO | MD | % | 160 | 126 | 135 | 151 | |
| TD | % | 118 | 105 | 124 | 121 | ||
| TS'OANE MOCHESO | MD | % | 1.3 | 1.4 | 1.2 | 1.2 | ASTM D1204 (150℃×30min) |
| TD | % | 0.5 | 0.5 | 0.5 | 0.1 | ||
| KOEFI KHOHANE | μs | - | 0.47 | 0.45 | 0.43 | 0.38 | ASTM D1894 |
| μd | - | 0.41 | 0.36 | 0.35 | 0.33 | ||
| PHEELLO | % | 90.3 | 90.2 | 90.1 | 90.1 | ASTM D1003 | |
| HASE | % | 3~6 | 3~6 | 3~6 | 3~6 | ||
| TSIETSO TS'OANE | dne/cm | 52 | 52 | 52 | 52 | ASTM D2578 | |
| PONAHALO | - | OK | EMTCO MOKHOA | ||||
| TLHOKOMELO | Ka holimo ke litekanyetso tse tloaelehileng, eseng boleng ba tiiso. | ||||||
Teko ea tsitsipano ea ho koloba e sebetsa feela filiming e alafiloeng ke corona.
GM60Letoto le kenyelletsa GM60, GM60A, GM60B.Moholi oa tsona o fapane.
Re na le sehlopha sa litsebi se ka fanang ka lihlahisoa le litharollo tse hlophisitsoeng ho latela litlhoko tsa bareki le ho hlophisa lihlahisoa tse loketseng bareki. Ho feta moo, re shebana le lipatlisiso tsa sehlahisoa le nts'etsopele le boqapi, re tsoela pele ho ntlafatsa lits'ebetso tsa tlhahiso, 'me re ikitlaelletsa ho fa bareki lihlahisoa tsa boleng bo holimo. Haeba u thahasella lihlahisoa tsa rona tsa lifilimi, ka kopo etela sebaka sa rona sa marang-rang: www.dongfang-insulation.com, 'me u tšepa ho fumana lihlahisoa tseo u li batlang mona.
Nako ea poso: Sep-12-2024
